What We Like About This Adirondack Set
The Mahogany ļ¾ Adirondack Set for Two is designed with pure luxury in mind. Its ultra-contoured, ergonomically designed seat and backrest, along with the extra-wide armrests, let you sit comfortably for hours on end. Two ottomans and an end table only add to the peaceful setting. Add additional comfort to your adirondack chair by adding our 19.5L x 17W inch cushion at check-out.
The Mahogany Adirondack Set is constructed of kiln-dried dark Red Meranti Mahogany. To ensure durability and a luxurious appearance, it features stainless steel-finished brass fasteners and wood-plugged screw holes. Assembly is easy and requires only common household tools. Each chair has wide arms that are at the perfect height for resting your arms or a drink. This couples to give the chair an unmatched comfort when compared to other Adirondack chairs that simply have a straight back and straight bottom. This comfort is further enhanced with the use of either the Ottoman (which gives you a long comfortable roll similar to a chaise lounge) or the Footrest/End Table (that raises your feet higher than the Ottoman for a more laid-back feel, which also doubles as an end table).
Go ahead and order this Adirondack Chair today to enhance your enjoyment of any outdoor setting.
More about the construction:
Our Mahogany Adirondack Set for Two is constructed of kiln-dried 5/4-inch Dark Red Meranti Variety Mahogany. We use 5/4-inch lumber throughout our entire product line, with the finished thickness of 1 1/16 inches. Mahogany is a tropical hardwood that is easily maintained and naturally insect-, fungus-, and rot-resistant. It is a hard, strong wood comparable in strength to oak and teak, and is much more scratch-resistant than softer woods like cedar and pine. With best regards for our environment, we take every effort to ensure that our mahogany is sourced from well-managed permanent forests that allocate re-plantation.
All our exposed hardware is of the highest-quality brass with stainless steel finish to eliminate rust and staining of the wood. Our bolts are of 5/16-inch diameter to give us a strong securing fastener. We also use 5/16-inch hanger bolts for fastening the back of the arm to the back leg. (A hanger bolt is a bolt that is a wood screw on one side and nut threaded on the other). Hanger bolts give the arm a very strong, sturdy and virtually unbreakable bond to the chair.
Some of the special features of our furniture include plugged screw holes that are sanded flush for a smooth finish. It has been our experience that plugged screw holes not only look and feel nice by adding a touch of quality, but they also provide a purpose. With basic countersunk screw holes, the wood has a tendency to surface-crack at the middle of the hole, and then extend to the end grain of the wood. Though this kind of cracking is not damaging to the furniture, we prevent it by plugging the screw holes. We also provide button caps to cover screw holes that have to be left unplugged for shipping, leaving no exposed holes on the finished product.
All edges of our furniture are routered with a round over. This gives our furniture a smooth, sculptured look and feel and eliminates snags and splinters.
